Scantronic 4603 Manual de instalación descargar pdf (Pagina 7)

496372 Issue 1 7 of 34

Coding The Transmitter

Remove the self-tapping screws and carefully ease the top of the case

upwards.

Set the site code on the large 10-way DIL switch as follows: Note that UP is

ON and DOWN is OFF. Do not set all switches to ON or all switches to OFF

or the transmitter will not work correctly.

4600

Set switches 1 to 6 to the site-code of the 4600. Set switches 7-10 and the 2-

way DIL switch to the zone number.

Figure 3. Coding for 4600

4611/13

Make sure the switches 1-10 and 1-2 on the transmitter match those on the

receiver exactly.

4602

1 2 3 4 5 6 7 8 9 10 11 12 ... 33 34

Sin comentarios

Scantronic 4603 Manual de instalación Pagina 7