Scantronic 4603 Manual de instalación descargar pdf (Pagina 30)

30 of 34 496372 Issue 1

4612

Switches 1 to 10 on the receiver match switches 1 to 8 and 1 to 2 on the

4609. Switch 3 on the 4609 matches switch 3 or 1 on the receiver depending

on if it is channel A or B. Jumper J2 matches switch 4 or 2 on the receiver

depending on if it is channel A or B. If J2 is linked then make sure switch is

on. If J2 is unlinked then make sure switch is off.

Figure 22. Coding 4609 for 4612

4611/3

Switches 1 to 8 and 1 to 3 on the receiver match switches 1 to 8 and 1 to 3

on the 4609. Switch 12 on the receiver corresponds to jumper J2 on the

4609. If switch 12 on the receiver is ON then place jumper J2 on the 4609

ON.

4660/75

Refer to installation manual.

Testing

To test if the smoke detector is working press the test button on the unit for

10 seconds. After 10 seconds the unit gives a tone and a transmission.

4624

Introduction

The 4624, 4-Channel Static Transmitter is a long-range telemetry transmitter

which can be used with two normally open and two normally closed inputs or

four normally closed inputs. The transmitter is powered from a 12VDC power

source and incorporates a constant input power monitoring circuit and low

battery indication, and is housed in an aluminium case.

4624

1 2 ... 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Scantronic 4603 Manual de instalación Pagina 30