Scantronic 4603 Manual de instalación descargar pdf (Pagina 18)

18 of 34 496372 Issue 1

Technical Specification

Dimensions h x w x d 102 x 44 x 20mm.

Input supply: 3.7V Lithium battery.

Temperature -10°C to 55°C. Humidity up to 80% (non

condensing).

Frequency 173.225 MHz.

Output power 1mW

Fully DTI approved to MPT1344 for alarm use only. No licence required.

BS6799 Classes 1-3.

Coding The Transmitter

Remove the self-tapping screws and carefully ease the top of the case

upwards.

Set the site code on the large 10-way DIL switch. Note that UP is ON and

DOWN is OFF. Do not set all switches to ON or the transmitter will not work

correctly.

4600

Set switches 1 to 6 to the site-code of the 4600. Set switches 7-10 as shown

below. The top button will set or unset the panel. The personal attack buttons

will trip zone 10 (as Personal Attack).

Figure 13. Coding for 4600

4618/9

Set switches 1 to 7 to the site code of the 4618/9. Set switches 8 to 10 to the

zone number. The top button triggers channel A. The side buttons trigger

channel B. For further information refer to the 4618 Installation Guide.

4605

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

Sin comentarios

Scantronic 4603 Manual de instalación Pagina 18