Scantronic 808 Guía de usuario descargar pdf (Pagina 4)

4 496235 Issue 1

Using the Keypad

Figure 1 below shows the keypad in detail.

Figure 1. 808 Keypad

The keypad has the following displays and controls:

Level LEDs Each Level LED (Light Emitting Diode) glows when

a Level is set. The LED is dark when the Level is

unset.

Power LED The Power LED glows when the system is using

mains power. If the Power LED flashes slowly then

the mains power has been disconnected and the

system is running off the stand-by battery.

LCD The system displays information and instructions

through the LCD (Liquid Crystal Display). The

system displays which detector has been triggered

by giving its zone number. You can use the keypad

to give detectors meaningful zone names. The

system will then display the names when the

detector is triggered.

Illuminated keypad The keypad can be set up so that the keys are

illuminated from behind.

Level Setting Keys Use these keys to set individual Levels. (Note that

you will have to use your access code first.)

Panic Alarm Keys Press keys 1 and 3 together to raise a personal

attack alarm. (Check with your Installer that your

system is programmed with this function.)

1. Introduction

8 characterLiquid Crystal

Display (LCD)

Optional programmable

panic alarm keys. Press

keys 1 and 3 together

Optional programmable

control function keys.

Press keys 7 and 9

together.

Menu and Enter keys

Levels LEDs (Set or

Unset)

Level setting keys

Keyboard with

backlit soft rubber

keys

Power

1 2 3 4 5 6 7 8 9 ... 25 26

Comentarios a estos manuales

Sin comentarios

Scantronic 808 Guía de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Scantronic 808