Scantronic 8136 Guía de usuario Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
496256 Issue 1 35
6. Supervisor
5. Press A or B to change the bottom line between "NOT PERMITTED"
and "PERMITTED".
6. Press Enter.
The system saves the change and the top line of
the display shows: U02:LOG ACCESS
Giving a User Log Access
1. Start menu 8.
2. Press Enter until the top line of the display shows "U01:LOG ACCESS".
3. Press A or B until the display shows the correct user number (or key in
the user number if you already know it).
The display shows (for example): U02:LOG ACCESS
NOT PERMITTED
4. Press Enter.
The display moves the cursor to the bottom line: U02:LOG ACCESS
NOT PERMITTED
5. Press A or B to change the bottom line between "NOT PERMITTED"
and "PERMITTED".
6. Press Enter.
The system saves the change and the
top line of the display shows: U02:CHANGE NAMES
Allowing a User to Change Zone Names
1. Start menu 8.
2. Press Enter until the top line of the display shows "U01:CHANGE
NAMES".
3. Press A or B until the display shows the correct user number (or key in
the user number directly).
The display shows (for example): U02:CHANGE NAMES
NOT PERMITTED
4. Press Enter.
The cursor moves to the bottom line: U02:CHANGE NAMES
NOT PERMITTED
5. Press A or B to change the bottom line between "NOT PERMITTED"
and "PERMITTED".
6. Press Enter.
The system saves the change and the
top line of the display shows: U02:RESET
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Comentarios a estos manuales

Sin comentarios